The Mvix Xhibit signage system connects to the Xhibit Signage content management server over the internet. In fact, a regular HTTP/HTTPS protocol establishes this connection. Which is the same protocol that a PC or laptop uses to connect with any website. So which ports need you need to open to be able to connect to Xhibit Signage?
Highly-secured corporate networks may restrict web-connections and file transfer protocols due to security concerns via blockers such as firewalls, managed switches, etc., and will need to
have the following ports/IP addresses open for uninhibited communications with the Xhibit Signage solution. We also recommend keeping these devices on networks/subnets with less security intensive needs when possible, as it will help reduce additional points of contact that will need to be managed.
IP Addresses
Traffic will need to be allowed to www.xhibitsignage.com, which includes the following IP addresses;
- 67.225.171.208
- 67.225.171.236
- 67.225.171.237
- 67.225.171.7
- 67.225.171.8
- 67.225.171.9
Outbound
- HTTP – TCP Port 80
- HTTP – TCP Port 8080
- HTTPS – -TCP Port 443
- WebSockets – TCP Port 5001
- TCP Port 5938
- The connection should work on all players connected to the internet. Some networks with additional security may require additional steps to receive support. Further, you may find more information about the network requirements to receive remote support by clicking here.
- Note: TCP port 5938 is not required for BrightSign, LG and Android hardware, only for Xhibit and Flex for MiniPC BYOD hardware.
- The connection should work on all players connected to the internet. Some networks with additional security may require additional steps to receive support. Further, you may find more information about the network requirements to receive remote support by clicking here.
- UDP Port 123
- TCP Port 80 (HTTP)

As of March 2019, we are requiring TCP Port 5001 (WebSockets) to be open in your network. This is to enable enhanced features and faster response times for your devices.
